Blood, Sweat & Tears
$100
per hour
Fabrication an Art and Science
$110
per hour
Electrical Installation and Repair
$120
per hour
Flat Rate Installations
Flat rate installations give you a flat rate estimate on special installation on common labor.
There can be adjustments in price due to what other modifications you have that cause the job to be more difficult. If the parts are used the cost may be higher due to missing components, or parts may need to be repaired for proper installation. As well as any repairs needed due to previous work performed by other shops.
Subaru BRZ / Scion FRS
- Clutch & Flywheel Installation/Replacement:$400
- WHITELINE Transmission Mount Bushing Installation:$100
- Lowering Springs Installation:$200
- Coilover Installation:$300
- Spark Plugs Installation/Replacement:$300Gap to factory or performance specs
Honda / Acura
All though we normally work on the S2000, Integra and Civic, we service to OEM specification all other Honda/Acura models. We follow Honda/Acura’s suggested servicing by your mileage. Give us a call about your ILX, TSX, TL, RDX, Accord, CRV or any other models and we will take care of you.
Headers
- 88-91 Honda Civic$100
May require notching of subframe or aftermarket subframe at an extra charge.
- 90-93 Acura Integra$100
May require notching of subframe or aftermarket subframe at an extra charge.
- 92-95 Honda Civic$100
- 96-00 Honda Civic$100
- 94-01 Acura Integra$100
- 02-06 Acura RSX$200
- 06-11 Honda Civic$200
- Honda S2000$250
Depending on what type of header pricing may change.
Throttle Body Bore
- AP2 S2000$250
Clutch & Flywheel
Some vehicles require new flywheels or may need to be re-surfaced. Does not include fluids. Prices can change due to modifications to vehicle.
- B-Series$350
Starting Price
- K-Series$450Starting Price
- J-Series$450Starting Price
- S2000$450Starting Price
Aftermarket Motor Mounts / Differential Mounts
- 06-11 Honda Civic SI Hasport or Innovative complete mount kit:$405
- Honda S2000 Innovative mounts:$250
Maintenance
- OEM Service Oil Change:$70
OE filter and your choice of oils; Redline, Motul, Schaffer, etc.
- OEM Service M/T transmission fluid service:$60
Mitsubishi
Clutch & Flywheel
Some vehicles require new flywheels or may need to be re-surfaced. Does not include fluids. Prices can change due to modifications to vehicle.
- EVO VIII/IX Clutch & Flywheel Installation/Replacement:$650
With proper bleeding of ACD system, this does not include fluids.
- EVO X Clutch & Flywheel Installation/Replacement:$650
Exhaust
- EVO VIII/IX O2 Housing & Downpipe Installation:$400
Not including fluids for radiator.
- EVO X Complete Downpipe (AMS Widemouth) Installation:$450
- EVO X Short Downpipe$100
Nissan / Infiniti
All though we primarily service, repair and modify the Nissan 350Z and Infiniti G35, we service to OEM specification all other Nissan/Infiniti models. We follow Nissan/Infiniti suggested servicing by your mileage. Give us a call about your FX35, Q45, Altima, Maxima, Sentra or any other models and we will take care of you. oc infiniti performance oc nissan performance oc nissan repair oc infiniti repair orange county infiniti performance orange county nissan performance orange county nissan repair orange county infiniti repair
Nissan 350z / Infiniti G35
- Brake Pads & Rotors Installation/Replacement Per Axle:$100
- Compression Test:$250
- Spark Plug Installation/Replacement:$200
- High Flow Cats/Test Pipes Installation:$100
- Short Tube Headers Installation:$400Price varies due to brand.
- Long Tube Headers Installation:$600Price varies due to brand. Includes extending AFR sensor wiring and heat wrapping. (Heat wrap is another charge)
- Greddy TT Kit Installation:$2000
Installation is for a brand new kit. If the kit is used price may go up.
- Clutch & Flywheel Installation/Replacement: External slave cylinder$450
- Clutch & Flywheel Installation/Replacement: Internal slave cylinder$500With clutch slave cylinder alteration add $150
- Motor Mount Installation/Replacement:$500Price may change depending on what headers/turbo are installed in the vehicle
- Rear Differential Carrier Bushings Installation: WHITELINE and SPL Pro Suspension differential bushings$500
- Rear Differential Carrier Bushings Installation: Energy Suspension Bushings$600
Nissan 370z / Infiniti G37
- Brake Pads & Rotors Installation/Replacement Per Axle:$100
- Compression Test:$250
- Spark Plug Installation/Replacement:$200
- High Flow Cats/Test Pipes Installation:$100
- Short Tube Headers Installation: (price varies due to brand): Short tube headers$400Price varies due to brand.
- Log Tube Headers Installation:$600Price varies due to brand. Includes extending AFR sensor wiring and heat wrapping. (Heat wrap is another charge)
- Clutch & Flywheel Installation/Replacement:$500With clutch slave cylinder alteration add $150
- Rear Differential Carrier Bushings Installation: WHITELINE and SPL Pro Suspension differential bushings$550
Subaru
All though we normally work on the WRX and STI, we service to OEM specification all other Subaru models. We follow Subaru’s suggested servicing by your mileage. Give us a call about your Forester, Legacy, Outback or any other models and we will take care of you.
oc Subaru WRX / STi performance oc Subaru WRX / STi repair orange county Subaru WRX / STi performance orange county Subaru WRX / STi repair
Exhaust
- Downpipe Installation:$100
- Downpipe Installation: With modification of OEM heatsheild if wanted$150
Price may vary due what parts used and or what parts are already on the vehicle.
- Downpipe and Up-Pipe Installation:$300
Price may vary due what parts used and or what parts are already on the vehicle.
- High Flow Cats/Test Pipes Installation:$100
Service & Maintenance
- OEM Service Oil change:$80
OE filter and your choice of oils Redline, Motul, Schaffer, etc.
- OEM Service Transmission & Differential Service w/ Motul:$140
Drive-By-Wire throttle body boring
- Bore Throttle Body From 60mm To 64mm$250
Light weight flap door w/button head allen. Adds 10-20hp on dyno depending on your setup, tuning is a requirement. Core required.
Ignition System
- Spark Plugs: Without air injection$200
Gapping to factory or performance specs.
- Spark Plugs: With air injection$250
Gapping to factory or performance specs.
Interior
- WRX Short Shifter and Bushings$150
Installation of Kartboy short shifter and bushings.
- STI Short Shifter and Bushings$200
Installation of Kartboy short shifter and bushings.
Clutch & Flywheel
- 2002 - 2010 WRX Clutch & Flywheel Installation/Replacement:$400
Installation with new aftermarket flywheel.
- 2011+ WRX Clutch & Flywheel Installation/Replacement:$500
Installation with new aftermarket flywheel.
NOTE: If re-using stock or aftermarket flywheel there is a $80 re-surface charge
- 2004 - 2010 STI Clutch & Flywheel Installation/Replacement:$500
Installation with new aftermarket flywheel.
NOTE: If re-using stock or aftermarket flywheel there is a $80 re-surface charge
- 2011 + STI Clutch & Flywheel Installation/Replacement:$550
Installation with new aftermarket flywheel.
NOTE: If re-using stock or aftermarket flywheel there is a $80 re-surface charge
Toyota / Lexus / Scion
All though we normally work on the Toyota Supra’s, we service to OEM specification all other Toyota/Lexus/Scion models. We follow Toyota/Lexus/Scion suggested servicing by your mileage. Give us a call about your LS430, SC430, IS350, Corolla, Camry, TC, XB or any other models and we will take care of you.
Ignition System
- Supra Spark Plugs Installation/Replacement:$90
Gapping to factory or performance specs. (This may change based on what modifications you have)
Clutch & Flywheel
- Supra Getrag / R154 Clutch & Flywheel Installation/Replacement:$400
Installation with new aftermarket flywheel. (This may change based on what modifications you have)
- Supra W58 Clutch & Flywheel Installation/Replacement:$350
Installation with new aftermarket flywheel. (This may change based on what modifications you have)
If re-using stock or aftermarket flywheel there is a $80 re-surface charge
Suspension
- lowering springs and shocks:Starting at $180
- Coilover Installation:Starting at $240
- Coilover Adjustments and SetupsStarting at $40
Tire Mounting & Balancing
- Per tire on wheels brought in:$20
Mount and balance includes German rubber valve stems and stick on wheels weights where applicable.
Prices may vary depending on whether rims are reverse mount, and what size tires you may be using. Please call for more information.
- Per tire on wheels having to be removed from vehicle:$25
Mount and balance includes German rubber valve stems and stick on wheels weights where applicable.
Prices may vary depending on whether rims are reverse mount, and what size tires you may be using. Please call for more information.
- Tire Bead Blasting (For Stretched Tires)Per Tire $15
Fender Rolling
- Fender Rolling Per Fender:$50
Price may vary due what parts are on the vehicle, if fenders need to be pulled price may go up.
Intercooler/Intake Pipe Bead Rolling
- Bead Rolling AluminumPer Pipe $10
- Bead Rolling SteelPer Pipe $15