Project Import Honda B-Series Vtec Oil Breather Can Kit (STREET)(Push-Lok Fittings)
What is an oil catch can or breather can?
PCV system’s allow oil vapor or liquid to be suck into the intake manifold. When engine is modified to make more power the increased crankcase pressure allows the possibility of more oil getting into intake manifold. Oil sucked into intake manifold will get into combustion chamber causing fuel dilution, and or increased compression which will increase knock numbers.
This kit is designed to remove PCV valve, and valve cover breather hose and install new block fittings so that you can route the crank case pressure to a breather tank. This kit will help relieve built up crank case pressure from lightly to heavily modified B-Series motors. The kit comes with two adapter fitting with two seal washers for the block, one PI breather / oil catch tank, AN fittings for the can, hoses, and other small misc components for installation.
PCV valve’s are controlled vacuum leaks for engines. The removal of PCV valve will change the idle speed of the engine and the air fuel ratio. This kit requires some modifications to the engine and other components to properly install. This kit is meant for NA and turbo setups.
EACH KIT IS BUILT TO ORDER, SO PLEASE ALLOW 3 EXTRA DAYS FOR BUILD TIME ONCE YOUR ORDER IS PLACED.
THIS KIT IS UNIVERSAL MOUNTING, YOU WILL HAVE TO COME UP WITH PROPER MOUNTING FOR BREATHER.
BREATHER TANK IS FOR OFF ROAD USE AND MAY NOT BE LEGAL IN YOUR STATE.